Search

+

Working at Heights Training Course

Registration Schedule

Loading Events

November 2024

Working at Height Course

9 places left

Working at Height Course

12 places left

December 2024

Working at Height Course

12 places left

Working at Height Course

12 places left

Working at Height Course

12 places left

Working at Height Course

12 places left
+ Export Events

(Contact us to inquire about the group rate).

The worker(s) in question must have completed fall protection training that met the requirements of section 26.2(1) of O. Reg. 213/91 (Construction Projects) before April 1, 2015, and the worker must be enrolled in a working at heights training program.   Working at Heights training course is mandatory for all job-site construction workers who are using fall protection equipment. If you don’t have the latest Working at Heights Certificate you will not be able to work at heights and may be subjected to a fine. As a partner of IHSA we can provide proper Working at Heights training according to the Ontario regulations. You may come to our Toronto training center located in Concord or we can come out and teach at your work site location in Mississauga, Oakville, Vaughan, Brampton, Maple, Richmond Hill, Aurora, Scarborough, Markham and other cities inside and around the Greater Toronto Area.

$150 PER PERSON. REGISTER TODAY

Working At Height Training Course

Course Description

DURATION: 6.5 hours. REQUIREMENTS: Valid piece of ID, hard hat, safety boots and safety glasses. CERTIFICATION: Working at Heights – Fundamentals of Fall Prevention   Working at Height Course is now mandatory for all construction workers in Ontario. Our course has been approved by the Chief Prevention Officer of the Ontario Ministry of Labour and includes all aspects of fall prevention in the workplace.   Unfortunately, falls are nearly the number one hazard on job sites and are the leading cause of fatalities in the construction industry. This course provides participants with the basic knowledge needed to work safely in work areas where there may be exposure to fall hazards. The Working at Heights course addresses safe practices and procedures as specified in Regulations empowered by the Ontario Occupational Health and Safety Act. This course requires a full day and delivered in two parts: a theoretical portion in the morning and a practical component in the afternoon.   Students are instructed on how to plan, protect and prepare themselves and their work site to identify and prevent surface falls as well as to work safely from heights within all guidelines and regulations. Our in-depth training follows the parameters of the new training standard. Quality is assured – we guarantee you will receive a complete and comprehensive day of training that includes all Ministry Of Labour requirements.

Course Outline

  • Use of personal fall protection equipment
  • Rights & responsibilities related to Working at Heights under the OHSA
  • Fall hazard recognition
  • Hierarchy of controls & safe work strategies
  • Safety procedures for hazard warning methods & physical barriers
  • Safety procedures for ladders & lifting devices
  • Barriers, safety nets and anchor points
  • Fall prevention & rescue plans
  • On-site first aid for a fallen worker